Interface: Caltrans D6 Vehicle Detection Systems - CSU Fresno Research Program
Architecture Flow Definitions
barrier system control (Planned)
Information used to configure and control barrier systems that are represented by gates, barriers and other automated or remotely controlled systems used to manage entry to roadways.
barrier system status (Planned)
Current operating status of barrier systems. Barrier systems represent gates, barriers and other automated or remotely controlled systems used to manage entry to roadways. Status of the systems includes operating condition and current operational state.
environmental sensor data (Planned)
Current road conditions (e.g., surface temperature, subsurface temperature, moisture, icing, treatment status) and surface weather conditions (e.g., air temperature, wind speed, precipitation, visibility) as measured and reported by fixed and/or mobile environmental sensors. Operational status of the sensors is also included.
environmental sensors control (Planned)
Data used to configure and control environmental sensors.
hov data (Planned)
Current HOV lane information including both standard traffic flow measures and information regarding vehicle occupancy in HOV lanes, and operational status of the HOV monitoring equipment.
lane management control (Planned)
Information used to configure and control dynamic lane management systems.
lane management information (Planned)
System status including current operational state, violations, and logged information.
roadway warning system control (Planned)
Information used to configure and control roadway warning systems.
roadway warning system status (Planned)
Current operating status of roadway warning systems.
safeguard system control (Planned)
Data that controls safeguard systems (remotely controlled equipment used to mitigate the impact of incidents on transportation infrastructure, such as blast shields, exhaust systems, etc.).
safeguard system status (Planned)
Current operating status of safeguard systems (remotely controlled equipment used to mitigate the impact of incidents on transportation infrastructure, such as blast shields, exhaust systems, etc.). Status of the systems includes operating condition and current operational state.
short range communications status (Planned)
Status of the short range communications equipment including the current state or mode of operation and the current equipment status.
signal control commands (Planned)
Control of traffic signal controllers or field masters including clock synchronization.
signal control device configuration (Planned)
Data used to configure traffic signal control equipment including local controllers and system masters.
signal control plans (Planned)
Traffic signal timing parameters including minimum green time and interval durations for basic operation and cycle length, splits, offset, phase sequence, etc. for coordinated systems.
signal control status (Planned)
Operational and status data of traffic signal control equipment including operating condition and current indications.
signal fault data (Planned)
Faults from traffic signal control equipment.
signal system configuration (Planned)
Data used to configure traffic signal systems including configuring control sections and mode of operation (time based or traffic responsive).
traffic flow (Planned)
Raw and/or processed traffic detector data which allows derivation of traffic flow variables (e.g., speed, volume, and density measures) and associated information (e.g., congestion, potential incidents). This flow includes the traffic data and the operational status of the traffic detectors.
traffic images (Planned)
High fidelity, real-time traffic images suitable for surveillance monitoring by the operator or for use in machine vision applications.
traffic metering control (Planned)
Control commands and operating parameters for ramp meters, interchange meters, mainline meters, and other systems equipment associated with roadway metering operations.
traffic metering status (Planned)
Current operational status and operating parameters for ramp meters, interchange meters, mainline meters and other control equipment associated with roadway metering operations.
traffic probe data (Planned)
Vehicle data that is used to determine traffic conditions. In a basic implementation, the data could be limited to time stamped unique identifiers that can be used to measure a vehicle�s progress through the network. In more advanced implementations, the vehicle may report current position, speed, and heading and snapshots of recent events including route information, starts and stops, speed changes, and other information that can be used to estimate traffic conditions.
traffic sensor control (Planned)
Information used to configure and control traffic sensor systems.
vehicle signage data (Planned)
In-vehicle signing data that augments regulatory, warning, and informational road signs and signals. The information provided would include static sign information (e.g., stop, curve warning, guide signs, service signs, and directional signs) and dynamic information (e.g., current signal states, grade crossing information, local traffic and road conditions, advisories, and detours).
video surveillance control (Planned)
Information used to configure and control video surveillance systems.